201 Business Park Blvd.,
Columbia, SC 29203

803.788.6034

RAM Street HydraulicRelease Bearings

RAM hydraulic release bearings are designed for stock applications, kit car build ups, or circle track.  The bearing is a floating design and installation is simple and quick.  Optimal uses for this bearing are circle track cars utilizing stock style clutches, or any project car in which fitting mechanical linkage is not possible.  The bearing requires a minimum 3/4 inch bore master cylinder and a -3AN feed line to run from the master to the bearing.  A remote bleeder kit is available to make bleeding simple from outside the bellhousing.  All parts necessary for rebuild are available from RAM.  

 

 

 

Watch this video to learn more about RAM Hydraulic Bearings!

 

 

     
Description Specifications Part number
                                                                    
GM Hydraulic bearing assembly Including bleeder kit. (utilizing the 1.375" transmission collar size) 1 3/4" Compressed length with  .700 travel     78125
HD GM Hydraulic bearing assembly Including bleeder kit. (utilizing the 1.375" transmission collar size) 1 3/4" Compressed length with  .700 travel     78125HD
Ford T-5 Applications, collar casting number '1908' 1 3/4" Compressed length with  .700 travel   78130

GM Tremec Applications

1 3/4" Compressed length with  .700 travel  

78131

Ford Tremec Applications

1 3/4" Compressed length with  .700 travel   78132
NOTE:  For other T5 collar casting numbers, use pn 78136.  Bearing retainer collar diameter must be machined to 1.370"  
   
Remote bleeder kit 78510
Replacement 'o' ring set for 78125HD (housing diameter 2.615") 78509
Replacement 'o' ring set (housing diameter 2.250") 78505
Replacement  bearing only (early press on style / Silver) 78015
Replacement  bearing only (late push on style / Black) 78017
    (Replacement push on style bearing can be removed and installed by hand)
 
T-56 Bearings
   
GM T-56 /  LS1 & LS6  Increased travel over stock 78165
GM T-56 / LS2, LS3 & LS7  Increased travel over stock 78170
GM T-56 / Pontiac GTO 04-06  Increased travel over stock 78173
Ford Mustang 05-13*         Increased travel over stock 78175
2008-up Challenger  Increased travel over stock 78183
2010-up Camaro Increased travel over stock 78180
   
Replacement 'o' ring set for housing diameter 2.615" 78509
Replacement 'o' ring set for housing diameter 2.250" 78505

 

RETROFIT T-56 BEARING


Description

Specifications

Part number

                                                                  
retrofit T-56 for custom applications with GM 8 cyl. two piece and one piece main seal blocks.

2" Compressed length with  .700 Max travel    

78160
Replacement 'o' ring set for housing diameter 2.615" 78509
Replacement 'o' ring set for housing diameter 2.250" 78505

 

Retrofit T-56 Bearing

The T-56 bearing is designed for use in retrofit or custom applications with GM engines.  Early engine applications require a transmission spacer with the T-56.  Check with your transmission supplier.  This kit contains all mounting hardware, fittings and remote bleeder.  This bearing requires a 3/4 inch master cylinder.

hydraulic pedal adjustment

For information on the RAM hydraulic pedal adjustment system click here